Camping trailer, Tent trailer, Teardrop trailer and T@B Trailer Digital Voltmeter by LASCAR
 |
This is made by LASCAR. Available at: www.newark.com Drill a 1/4" hole in the cabinet for the LASCAR hollow mounting shaft. Then on the back side drill a large hole that allows you to tighten the nut with a socket. I used a 9/16" drill. Drill this large hole through from the back side using a drill bit stop so it gets close to breaking out the front side but stops just short of breaking through – leaving about 1/8" of wood will work out fine. The Euro style terminal strips are sold at Radio Shack or better electronics stores. They come about 4"-6" long and you cut off the length you need. Attach with screws or HD double stick servo tape from a hobby shop.
|
From:RallyIsetta
Views:26
 0ratings
|
| Time:02:51 | More inAutos & Vehicles |
More: continued here
Comments feed